Setup – armgcc + J-Link#

Build#

Run west build with any of the seven supported targets:

west build -p always -b mimxrt2660evk <example_path> \
     --toolchain armgcc --config <target>

Replace <target> with one of:

Target	Build configs
debug	`debug` / `release`
xspi_nor	`xspi_nor_debug` / `xspi_nor_release`
xspi_nor_psram	`xspi_nor_psram_debug` / `xspi_nor_psram_release`
psram	`psram_debug` / `psram_release`
psram_txt	`psram_txt_debug` / `psram_txt_release`
ram_only	`ram_only_debug` / `ram_only_release`
psram_only	`psram_only_debug` / `psram_only_release`

Output: standard .elf.

Take the .elf to Ozone and follow the Ozone setup page in this guide.